Search results for: 'modeles de pages de garde simple a telecharger'

The PowerFit 10pc HCS Wood Jigsaw Blade Set equips your jigsaw to cut wood, plastic, plasterboard, Perspex sheets, and laminate.

Get your big cleaning jobs done quicker with the PowerFit high-performance turbo floor brush (35mm).

Equip your Multi Tool to cut various construction materials including timber, nail-embedded timber, non-ferrous metal (soft metal), grout and mortar with the Powerfit 12-Piece Multi Tool Plunge Cut Set. This Set includes 2 x Bi-Metal Blade, 3 x HCS Plunge Cut Blades, 2 x Scraper Blades, 1 x Carbide Grout Blade, 1 x Segmented Diamond Blade, 1 x Carbide Rasp Blade, 2 Segmented Saw Blades.

PowerFit 23Ga 25mm Electro-Galvanized Steel Pin Nails are ideal for fastening small or intricate wood pieces such as timber mouldings, wall and furniture trims, picture frames and upholstering. With a headless pin, these nails are barely visible after they’re fired in. This enables you to achieve a smooth finish on wooden surfaces for sanding, staining and painting.

PowerFit 23Ga 18mm Electro-Galvanized Steel Pin Nails are ideal for fastening small or intricate wood pieces such as timber mouldings, wall and furniture trims, picture frames and upholstering. With a headless pin, these nails are barely visible after they’re fired in. This enables you to achieve a smooth finish on wooden surfaces for sanding, staining and painting.

These 2-packs of replacement Fuel Primer Bulbs suit Homelite and Ryobi petrol units.

You can rely on these PowerFit 38mm Narrow-Crown Staples to hold firm across a range of finishing and delicate applications where you want your staples to be less obvious (such as fixing mesh and wire to timber, or installing trim, lattice, upholstery and moulding).

Ideal for finishing applications such as fixing wire and mesh to timber. PowerFit 6000 Narrow Crown Staples have an “Electro-Galvanised” finish, which provide enhanced corrosion resistance and increased durability.

Cut curves into timber with both precision and tidiness thanks to the PowerFit 14TPI scroll jigsaw blades. With 14 teeth for every inch of blade, you’ll be able to keep the material clean and smooth as you cut. And the narrower construction of the scroll blade helps it tackle curves and bends in the product.

Get through the toughest cutting in the blink of an eye with the PowerFit 10TPI jigsaw blades. With 10 teeth for every inch of blade, you’ll be able to balance speed for precision as you cut. These blades are best for straight cuts through material, particularly if you need the job done both quickly and smoothly.

Cut right to the very edge with the PowerFit 10TPI flush cut jigsaw blade. With 10 teeth for every inch of blade, you’ll be able to balance speed and precision as you cut. And with the longer flush cut design, you’ll be able to cut materials right up to the edge of the jigsaw’s shoe. This is ideal if you’re working in a tight space, where the jigsaw’s shoe would prevent you from completing the cut.

The Jamec style ¼" Male Coupler is designed to fit other Jamec style plugs and the ¼” BSP Male Thread is suitable to fit directly into ¼” BSP Female adaptors.

The Ryco style ¼" Male Coupler is designed to fit other Ryco style plugs and the ¼” BSP Male Thread is suitable to fit directly into ¼” BSP Female adaptors. The coupler allows end users, to quickly and easily swap between air tools and accessories. Made from a durable steel construction that ensures this coupler will last longer, while the red-coloured band easily identifies it as a Ryco style fitting.

The Ryco style ¼” Female Coupler is a pneumatic fitting designed to be compatible with other Ryco style plugs and is suitable for fitment directly to any ¼” BSP Male Thread air fitting, allowing you to fit the Female Coupler to air compressor and air hoses, allowing users to quickly and easily swap between tools/accessories.

The Nitto style ¼” Barbed Plug has a 10mm barb that is designed to provide a secure connection from your air hose to your air tools/accessories.

The Nitto style ¼" Male Coupler is designed to fit other Nitto style plugs and the ¼” BSP Male Thread is suitable to fit directly into ¼” BSP Female adaptors.