Search results for: 'bunnings ryobi bandsaw blade 1572 x 6.35'

These 2-packs of replacement Fuel Primer Bulbs suit Homelite and Ryobi petrol units.

Get through the toughest cutting in the blink of an eye with PowerFit 6TPI jigsaw blades. With just 6 teeth for every inch of blade, you’ll have the rugged strength you need to cut through something quickly. These blades are best for straight cuts through material, particularly if you need the job done fast.

You can rely on these PowerFit 38mm Narrow-Crown Staples to hold firm across a range of finishing and delicate applications where you want your staples to be less obvious (such as fixing mesh and wire to timber, or installing trim, lattice, upholstery and moulding).

Ideal for finishing applications such as fixing wire and mesh to timber. PowerFit 6000 Narrow Crown Staples have an “Electro-Galvanised” finish, which provide enhanced corrosion resistance and increased durability.

Ideal for finishing applications such as fixing wire and mesh to timber. PowerFit 6000 Narrow Crown Staples have an “Electro-Galvanised” finish, which provide enhanced corrosion resistance and increased durability.

Ideal for finishing applications such as fixing wire and mesh to timber. PowerFit 6000 Narrow Crown Staples have an “Electro-Galvanised” finish, which provide enhanced corrosion resistance and increased durability.

Ideal for finishing applications such as fixing wire and mesh to timber. PowerFit 6000 Narrow Crown Staples have an “Electro-Galvanised” finish, which provide enhanced corrosion resistance and increased durability.

Ideal for finishing applications such as fixing wire and mesh to timber. PowerFit 6000 Narrow Crown Staples have an “Electro-Galvanised” finish, which provide enhanced corrosion resistance and increased durability.

Can cut timber, plasterboard, plastic, metal, copper and putty

Suitable for use with the full boar FBT-2540 bandsaw.

Can be used to remove mortar, grout, soft stone and porous concrete

Cut through some of the most difficult surfaces with the PowerFit carbide ceramics jigsaw blade. The blade is coated in 30 grit carbide – for maximum performance and blade longevity. And once fitted, you’ll be ready to cut straight, semi-fine cuts through ceramic wall tiles, fibreglass, cast iron, and other ceramic materials.

Restore the cutting performance of your Brushcutter with the PowerFit 26cm Tri-Star Brushcutter Blade. This sharp, hardened steel Tri-Blade features three teeth and provides a 26cm cutting path. It’s suitable for slashing thick grass and tall weeds and is a robust alternative to traditional nylon line cutting heads.

Tackle the toughest cutting applications with the PowerFit diamond masonry jigsaw blade. Each blade is coated in 46 grit diamond-bonded carbide – for the ultimate cut through tough materials. Once fitted, you’ll be ready to cut straight, semi-fine cuts through hard tiles, granite, slate, limestone, porcelain, and other masonry products.

Cut right to the very edge with the PowerFit 10TPI flush cut jigsaw blade. With 10 teeth for every inch of blade, you’ll be able to balance speed and precision as you cut. And with the longer flush cut design, you’ll be able to cut materials right up to the edge of the jigsaw’s shoe. This is ideal if you’re working in a tight space, where the jigsaw’s shoe would prevent you from completing the cut.

Leave the top of your surface in the best possible condition with PowerFit 14TPI reverse jigsaw blades. With 14 teeth for every inch of blade, you’ll be able to keep the material clean and smooth as you cut. And the inverted blade teeth keep splinters and debris off the top of the surface – making it perfect for any benchtops or surfaces that can’t be inverted.