Search results for: 'who makes war hammer 40k'

Equip your Multi Tool to cut various construction materials including timber, nail-embedded timber, non-ferrous metal (soft metal), grout and mortar with the Powerfit 12-Piece Multi Tool Plunge Cut Set. This Set includes 2 x Bi-Metal Blade, 3 x HCS Plunge Cut Blades, 2 x Scraper Blades, 1 x Carbide Grout Blade, 1 x Segmented Diamond Blade, 1 x Carbide Rasp Blade, 2 Segmented Saw Blades.

The Air Hose is braided for flexibility and durability. It’s resistant to kinking, abrasion, grease and oil. The Air Hose is also rated for a maximum 300psi of pressure and suitable for a variety of industrial and commercial applications.

The Air Hose is braided for flexibility and durability. It’s resistant to kinking, abrasion, grease and oil. The Air Hose is also rated for a maximum 300psi of pressure and suitable for a variety of industrial and commercial applications.

The Air Hose is braided for flexibility and durability. It’s resistant to kinking, abrasion, grease and oil. The Air Hose is also rated for a maximum 300psi of pressure and suitable for a variety of industrial and commercial applications.

Connect your pneumatic tools and equipment to an air compressor with the Nitto 10m Recoil Air Hose with Nitto Fittings. The Hose’s Nitto fittings (¼” BSP male plug and coupler) are compatible with most compressors, pneumatic tools and equipment. These Nitto Fittings are chrome plated for corrosion protection, ensuring long life.

Restore the cutting performance of your Brushcutter with the PowerFit 26cm Tri-Star Brushcutter Blade. This sharp, hardened steel Tri-Blade features three teeth and provides a 26cm cutting path. It’s suitable for slashing thick grass and tall weeds and is a robust alternative to traditional nylon line cutting heads.

You can rely on these PowerFit 38mm Narrow-Crown Staples to hold firm across a range of finishing and delicate applications where you want your staples to be less obvious (such as fixing mesh and wire to timber, or installing trim, lattice, upholstery and moulding).

Ideal for finishing applications such as fixing wire and mesh to timber. PowerFit 6000 Narrow Crown Staples have an “Electro-Galvanised” finish, which provide enhanced corrosion resistance and increased durability.

Finish your DIY woodworking projects with durable yet unobtrusive PowerFit C1 Series Brad Nails. Our brad nails are great for use with thin, soft timber (such as floor skirting and architraves, light trimming, installing panels, and woodwork crafts).

Tackle the toughest cutting applications with the PowerFit diamond masonry jigsaw blade. Each blade is coated in 46 grit diamond-bonded carbide – for the ultimate cut through tough materials. Once fitted, you’ll be ready to cut straight, semi-fine cuts through hard tiles, granite, slate, limestone, porcelain, and other masonry products.

Cut through some of the most difficult surfaces with the PowerFit carbide ceramics jigsaw blade. The blade is coated in 30 grit carbide – for maximum performance and blade longevity. And once fitted, you’ll be ready to cut straight, semi-fine cuts through ceramic wall tiles, fibreglass, cast iron, and other ceramic materials.

Get any jigsawing job done smoothly with PowerFit 24TPI all-purpose blades. These blades offer a perfect finish to any cut through timber, plastics, metal, copper, plasterboard, Perspex sheeting, and more. This is ideal if the cut you’re working on needs to fit smoothly into place, or will be seen on your finished project.

Get any jigsawing job done fast with PowerFit 10-14 TPI all-purpose blades. These blades offer a fast, rough cut through timber, plastics, metal, copper, plasterboard, Perspex sheeting, and more. This is ideal if you’ve got a variety of cutting jobs to do, and if you need them done quickly.

Cut right to the very edge with the PowerFit 10TPI flush cut jigsaw blade. With 10 teeth for every inch of blade, you’ll be able to balance speed and precision as you cut. And with the longer flush cut design, you’ll be able to cut materials right up to the edge of the jigsaw’s shoe. This is ideal if you’re working in a tight space, where the jigsaw’s shoe would prevent you from completing the cut.

Leave the top of your surface in the best possible condition with PowerFit 14TPI reverse jigsaw blades. With 14 teeth for every inch of blade, you’ll be able to keep the material clean and smooth as you cut. And the inverted blade teeth keep splinters and debris off the top of the surface – making it perfect for any benchtops or surfaces that can’t be inverted.

Cut curves into timber with both precision and tidiness thanks to the PowerFit 14TPI scroll jigsaw blades. With 14 teeth for every inch of blade, you’ll be able to keep the material clean and smooth as you cut. And the narrower construction of the scroll blade helps it tackle curves and bends in the product.