Search results for: 'lift off to portal COKCOX.COM telegram cocaine shop Novo Mesto'

The Air Hose is braided for flexibility and durability. It’s resistant to kinking, abrasion, grease and oil. The Air Hose is also rated for a maximum 300psi of pressure and suitable for a variety of industrial and commercial applications.

The Nitto style ¼” Female 2-Way Splitter Coupler can connect 2x air hoses to an air compressor at the same time. It is also suitable for use with other Nitto style plugs and male adaptors with a ¼” BSP thread.

Cut right to the very edge with the PowerFit 10TPI flush cut jigsaw blade. With 10 teeth for every inch of blade, you’ll be able to balance speed and precision as you cut. And with the longer flush cut design, you’ll be able to cut materials right up to the edge of the jigsaw’s shoe. This is ideal if you’re working in a tight space, where the jigsaw’s shoe would prevent you from completing the cut.

The Ryco style ¼" Male Coupler is designed to fit other Ryco style plugs and the ¼” BSP Male Thread is suitable to fit directly into ¼” BSP Female adaptors. The coupler allows end users, to quickly and easily swap between air tools and accessories. Made from a durable steel construction that ensures this coupler will last longer, while the red-coloured band easily identifies it as a Ryco style fitting.

The Powerfit Nitto style 3/8” Male Swivel Coupler is suitable for use with other Nitto style air tool fittings to connect air tools/accessories that require some flexibility, like an air hose.

The Powerfit Nitto style 1/4" Male Swivel Coupler is suitable for use with other Nitto style air tool fittings to connect air tools or accessories that require some flexibility, like an air hose.

The Nitto style ¼” Barbed Plug has a 10mm barb that is designed to provide a secure connection from your air hose to your air tools/accessories.

Get through the toughest cutting in the blink of an eye with PowerFit 6TPI jigsaw blades. With just 6 teeth for every inch of blade, you’ll have the rugged strength you need to cut through something quickly. These blades are best for straight cuts through material, particularly if you need the job done fast.

Get through the toughest cutting in the blink of an eye with the PowerFit 10TPI jigsaw blades. With 10 teeth for every inch of blade, you’ll be able to balance speed for precision as you cut. These blades are best for straight cuts through material, particularly if you need the job done both quickly and smoothly.

Connect your pneumatic tools and equipment to an air compressor with the Nitto 10m Recoil Air Hose with Nitto Fittings. The Hose’s Nitto fittings (¼” BSP male plug and coupler) are compatible with most compressors, pneumatic tools and equipment. These Nitto Fittings are chrome plated for corrosion protection, ensuring long life.

You can rely on these PowerFit 38mm Narrow-Crown Staples to hold firm across a range of finishing and delicate applications where you want your staples to be less obvious (such as fixing mesh and wire to timber, or installing trim, lattice, upholstery and moulding).

Ideal for finishing applications such as fixing wire and mesh to timber. PowerFit 6000 Narrow Crown Staples have an “Electro-Galvanised” finish, which provide enhanced corrosion resistance and increased durability.

Finish your DIY woodworking projects with durable yet unobtrusive PowerFit C1 Series Brad Nails. Our brad nails are great for use with thin, soft timber (such as floor skirting and architraves, light trimming, installing panels, and woodwork crafts).

The Powerfit Jamec style ¼” Male Plug will connect to any Jamec style ¼” BSP Female adaptors used on compressors, air hoses and air tools that use Jamec style fittings. Made from durable steel that ensures a longer lasting air fitting, the orange-coloured band easily identifies it as a Jamec style fitting.

The Jamec style ¼" Male Coupler is designed to fit other Jamec style plugs and the ¼” BSP Male Thread is suitable to fit directly into ¼” BSP Female adaptors.

The Jamec style ¼” Female Coupler is a pneumatic fitting designed to be compatible with other Jamec style plugs and is suitable for fitment directly to any ¼” BSP Male Thread air fitting, allowing you to fit the Female Coupler to air compressors, hoses and other tools.