Search results for: '16GA C series Straight Brad Nails'

Finish your DIY woodworking projects with durable yet unobtrusive PowerFit C1 Series Brad Nails. Our brad nails are great for use with thin, soft timber (such as floor skirting and architraves, light trimming, installing panels, and woodwork crafts).

You can rely on these PowerFit 38mm Narrow-Crown Staples to hold firm across a range of finishing and delicate applications where you want your staples to be less obvious (such as fixing mesh and wire to timber, or installing trim, lattice, upholstery and moulding).

Ideal for finishing applications such as fixing wire and mesh to timber. PowerFit 6000 Narrow Crown Staples have an “Electro-Galvanised” finish, which provide enhanced corrosion resistance and increased durability.

PowerFit 23Ga 25mm Electro-Galvanized Steel Pin Nails are ideal for fastening small or intricate wood pieces such as timber mouldings, wall and furniture trims, picture frames and upholstering. With a headless pin, these nails are barely visible after they’re fired in. This enables you to achieve a smooth finish on wooden surfaces for sanding, staining and painting.

PowerFit 23Ga 18mm Electro-Galvanized Steel Pin Nails are ideal for fastening small or intricate wood pieces such as timber mouldings, wall and furniture trims, picture frames and upholstering. With a headless pin, these nails are barely visible after they’re fired in. This enables you to achieve a smooth finish on wooden surfaces for sanding, staining and painting.

The PowerFit 10pc HCS Wood Jigsaw Blade Set equips your jigsaw to cut wood, plastic, plasterboard, Perspex sheets, and laminate.

Cut through some of the most difficult surfaces with the PowerFit carbide ceramics jigsaw blade. The blade is coated in 30 grit carbide – for maximum performance and blade longevity. And once fitted, you’ll be ready to cut straight, semi-fine cuts through ceramic wall tiles, fibreglass, cast iron, and other ceramic materials.

PowerFit 24TPI Fine-Cut All-Purpose Jigsaw Blades equip your jigsaw to make fine, straight cuts in metal materials, plastic, plasterboard, Perspex sheets, and wood (including nail-embedded wood). These fine-cut jigsaw blades feature vented technology to reduce heat build-up, efficiently remove debris, and reduce contact with the material being cut. This allows you to make faster cuts while preserving the life of the blade.

Equip your Jigsaw to make curved and straight cuts into timber, plasterboard, nail-embedded timber, non-ferrous metal (soft metal), plastic, ceramic tile and fibreglass with the Powerfit 20-Piece Jigsaw Blade Set. This value-packed Set includes 15 x Bi-Metal Jigsaw Blades, 4 x HCS Jigsaw Blades, 1 x Carbide Grit Jigsaw Blade and Case.

Deliver the most delicate cuts – straight or curved – with PowerFit 20TPI laminate jigsaw blades. With 20 teeth for every inch of blade, this product will cut as smoothly as possible into any material. This makes it perfect for cutting laminate, or any other material that might crack or break under greater load.

Get through the toughest cutting in the blink of an eye with PowerFit 6TPI jigsaw blades. With just 6 teeth for every inch of blade, you’ll have the rugged strength you need to cut through something quickly. These blades are best for straight cuts through material, particularly if you need the job done fast.

Get through the toughest cutting in the blink of an eye with the PowerFit 10TPI jigsaw blades. With 10 teeth for every inch of blade, you’ll be able to balance speed for precision as you cut. These blades are best for straight cuts through material, particularly if you need the job done both quickly and smoothly.

Start cleaning those impossible places with the PowerFit flexible crevice tool (35mm).

Equip your Multi Tool to cut various construction materials including timber, nail-embedded timber, non-ferrous metal (soft metal), grout and mortar with the Powerfit 12-Piece Multi Tool Plunge Cut Set. This Set includes 2 x Bi-Metal Blade, 3 x HCS Plunge Cut Blades, 2 x Scraper Blades, 1 x Carbide Grout Blade, 1 x Segmented Diamond Blade, 1 x Carbide Rasp Blade, 2 Segmented Saw Blades.

Take your cleaning to an intricate new level with the PowerFit micro cleaning kit (35mm size).

Equip your Multi Tool to make plunge cuts into timber, non-ferrous metal, plasterboard and PVC pipe with the Powerfit 5-Piece Multi Tool Plunge Cut Set. This great value Set includes 1 x Bi-Metal Multi Tool Blade and 4 x HCS (High Carbon Steel) Multi Tool Blades.