Search results for: 'banner long green and yellow'

The BSP ¼” Female Tyre Chuck Fitting can quickly and easily be installed/removed to a vehicles Shrader Valve’s to inflate their tyres.

Connect your pneumatic tools and equipment to an air compressor with the Nitto 10m Recoil Air Hose with Nitto Fittings. The Hose’s Nitto fittings (¼” BSP male plug and coupler) are compatible with most compressors, pneumatic tools and equipment. These Nitto Fittings are chrome plated for corrosion protection, ensuring long life.

These 2-packs of replacement Fuel Primer Bulbs suit Homelite and Ryobi petrol units.

The Air Hose is braided for flexibility and durability. It’s resistant to kinking, abrasion, grease and oil. The Air Hose is also rated for a maximum 300psi of pressure and suitable for a variety of industrial and commercial applications.

The Air Hose is braided for flexibility and durability. It’s resistant to kinking, abrasion, grease and oil. The Air Hose is also rated for a maximum 300psi of pressure and suitable for a variety of industrial and commercial applications.

The Air Hose is braided for flexibility and durability. It’s resistant to kinking, abrasion, grease and oil. The Air Hose is also rated for a maximum 300psi of pressure and suitable for a variety of industrial and commercial applications.

Cut through some of the most difficult surfaces with the PowerFit carbide ceramics jigsaw blade. The blade is coated in 30 grit carbide – for maximum performance and blade longevity. And once fitted, you’ll be ready to cut straight, semi-fine cuts through ceramic wall tiles, fibreglass, cast iron, and other ceramic materials.

The Ryco style ¼" Male Coupler is designed to fit other Ryco style plugs and the ¼” BSP Male Thread is suitable to fit directly into ¼” BSP Female adaptors. The coupler allows end users, to quickly and easily swap between air tools and accessories. Made from a durable steel construction that ensures this coupler will last longer, while the red-coloured band easily identifies it as a Ryco style fitting.

Cut right to the very edge with the PowerFit 10TPI flush cut jigsaw blade. With 10 teeth for every inch of blade, you’ll be able to balance speed and precision as you cut. And with the longer flush cut design, you’ll be able to cut materials right up to the edge of the jigsaw’s shoe. This is ideal if you’re working in a tight space, where the jigsaw’s shoe would prevent you from completing the cut.

Cut curves into timber with both precision and tidiness thanks to the PowerFit 14TPI scroll jigsaw blades. With 14 teeth for every inch of blade, you’ll be able to keep the material clean and smooth as you cut. And the narrower construction of the scroll blade helps it tackle curves and bends in the product.

You can rely on these PowerFit 38mm Narrow-Crown Staples to hold firm across a range of finishing and delicate applications where you want your staples to be less obvious (such as fixing mesh and wire to timber, or installing trim, lattice, upholstery and moulding).

Ideal for finishing applications such as fixing wire and mesh to timber. PowerFit 6000 Narrow Crown Staples have an “Electro-Galvanised” finish, which provide enhanced corrosion resistance and increased durability.

Leave the top of your surface in the best possible condition with PowerFit 14TPI reverse jigsaw blades. With 14 teeth for every inch of blade, you’ll be able to keep the material clean and smooth as you cut. And the inverted blade teeth keep splinters and debris off the top of the surface – making it perfect for any benchtops or surfaces that can’t be inverted.

Equip your Jigsaw to make curved and straight cuts into timber, plasterboard, nail-embedded timber, non-ferrous metal (soft metal), plastic, ceramic tile and fibreglass with the Powerfit 20-Piece Jigsaw Blade Set. This value-packed Set includes 15 x Bi-Metal Jigsaw Blades, 4 x HCS Jigsaw Blades, 1 x Carbide Grit Jigsaw Blade and Case.

PowerFit 23Ga 25mm Electro-Galvanized Steel Pin Nails are ideal for fastening small or intricate wood pieces such as timber mouldings, wall and furniture trims, picture frames and upholstering. With a headless pin, these nails are barely visible after they’re fired in. This enables you to achieve a smooth finish on wooden surfaces for sanding, staining and painting.

PowerFit 23Ga 18mm Electro-Galvanized Steel Pin Nails are ideal for fastening small or intricate wood pieces such as timber mouldings, wall and furniture trims, picture frames and upholstering. With a headless pin, these nails are barely visible after they’re fired in. This enables you to achieve a smooth finish on wooden surfaces for sanding, staining and painting.