Search results for: 'huhD AND 8670=7493'

These 2-packs of replacement Fuel Primer Bulbs suit Homelite and Ryobi petrol units.

You can rely on these PowerFit 38mm Narrow-Crown Staples to hold firm across a range of finishing and delicate applications where you want your staples to be less obvious (such as fixing mesh and wire to timber, or installing trim, lattice, upholstery and moulding).

Ideal for finishing applications such as fixing wire and mesh to timber. PowerFit 6000 Narrow Crown Staples have an “Electro-Galvanised” finish, which provide enhanced corrosion resistance and increased durability.

Equip your Jigsaw to make curved and straight cuts into timber, plasterboard, nail-embedded timber, non-ferrous metal (soft metal), plastic, ceramic tile and fibreglass with the Powerfit 20-Piece Jigsaw Blade Set. This value-packed Set includes 15 x Bi-Metal Jigsaw Blades, 4 x HCS Jigsaw Blades, 1 x Carbide Grit Jigsaw Blade and Case.

The Air Hose is braided for flexibility and durability. It’s resistant to kinking, abrasion, grease and oil. The Air Hose is also rated for a maximum 300psi of pressure and suitable for a variety of industrial and commercial applications.

The Air Hose is braided for flexibility and durability. It’s resistant to kinking, abrasion, grease and oil. The Air Hose is also rated for a maximum 300psi of pressure and suitable for a variety of industrial and commercial applications.

The Air Hose is braided for flexibility and durability. It’s resistant to kinking, abrasion, grease and oil. The Air Hose is also rated for a maximum 300psi of pressure and suitable for a variety of industrial and commercial applications.

Finish your DIY woodworking projects with durable yet unobtrusive PowerFit C1 Series Brad Nails. Our brad nails are great for use with thin, soft timber (such as floor skirting and architraves, light trimming, installing panels, and woodwork crafts).

Cut curves into timber with both precision and tidiness thanks to the PowerFit 14TPI scroll jigsaw blades. With 14 teeth for every inch of blade, you’ll be able to keep the material clean and smooth as you cut. And the narrower construction of the scroll blade helps it tackle curves and bends in the product.

Connect your pneumatic tools and equipment to an air compressor with the Nitto 10m Recoil Air Hose with Nitto Fittings. The Hose’s Nitto fittings (¼” BSP male plug and coupler) are compatible with most compressors, pneumatic tools and equipment. These Nitto Fittings are chrome plated for corrosion protection, ensuring long life.

Leave the top of your surface in the best possible condition with PowerFit 14TPI reverse jigsaw blades. With 14 teeth for every inch of blade, you’ll be able to keep the material clean and smooth as you cut. And the inverted blade teeth keep splinters and debris off the top of the surface – making it perfect for any benchtops or surfaces that can’t be inverted.

Equip your Multi Tool to make plunge cuts into timber, non-ferrous metal, plasterboard and PVC pipe with the Powerfit 5-Piece Multi Tool Plunge Cut Set. This great value Set includes 1 x Bi-Metal Multi Tool Blade and 4 x HCS (High Carbon Steel) Multi Tool Blades.

Equip your Multi Tool to cut various construction materials including timber, nail-embedded timber, non-ferrous metal (soft metal), grout and mortar with the Powerfit 12-Piece Multi Tool Plunge Cut Set. This Set includes 2 x Bi-Metal Blade, 3 x HCS Plunge Cut Blades, 2 x Scraper Blades, 1 x Carbide Grout Blade, 1 x Segmented Diamond Blade, 1 x Carbide Rasp Blade, 2 Segmented Saw Blades.

PowerFit 23Ga 25mm Electro-Galvanized Steel Pin Nails are ideal for fastening small or intricate wood pieces such as timber mouldings, wall and furniture trims, picture frames and upholstering. With a headless pin, these nails are barely visible after they’re fired in. This enables you to achieve a smooth finish on wooden surfaces for sanding, staining and painting.

PowerFit 23Ga 18mm Electro-Galvanized Steel Pin Nails are ideal for fastening small or intricate wood pieces such as timber mouldings, wall and furniture trims, picture frames and upholstering. With a headless pin, these nails are barely visible after they’re fired in. This enables you to achieve a smooth finish on wooden surfaces for sanding, staining and painting.

Cut through some of the most difficult surfaces with the PowerFit carbide ceramics jigsaw blade. The blade is coated in 30 grit carbide – for maximum performance and blade longevity. And once fitted, you’ll be ready to cut straight, semi-fine cuts through ceramic wall tiles, fibreglass, cast iron, and other ceramic materials.