Search results for: 'raspberry pi camera rev 1.3 3d model'

Leave the top of your surface in the best possible condition with PowerFit 14TPI reverse jigsaw blades. With 14 teeth for every inch of blade, you’ll be able to keep the material clean and smooth as you cut. And the inverted blade teeth keep splinters and debris off the top of the surface – making it perfect for any benchtops or surfaces that can’t be inverted.

PowerFit 23Ga 25mm Electro-Galvanized Steel Pin Nails are ideal for fastening small or intricate wood pieces such as timber mouldings, wall and furniture trims, picture frames and upholstering. With a headless pin, these nails are barely visible after they’re fired in. This enables you to achieve a smooth finish on wooden surfaces for sanding, staining and painting.

PowerFit 23Ga 18mm Electro-Galvanized Steel Pin Nails are ideal for fastening small or intricate wood pieces such as timber mouldings, wall and furniture trims, picture frames and upholstering. With a headless pin, these nails are barely visible after they’re fired in. This enables you to achieve a smooth finish on wooden surfaces for sanding, staining and painting.

The PowerFit 10pc HCS Wood Jigsaw Blade Set equips your jigsaw to cut wood, plastic, plasterboard, Perspex sheets, and laminate.

The Air Hose is braided for flexibility and durability. It’s resistant to kinking, abrasion, grease and oil. The Air Hose is also rated for a maximum 300psi of pressure and suitable for a variety of industrial and commercial applications.

Take your cleaning to an intricate new level with the PowerFit micro cleaning kit (35mm size).

You can rely on these PowerFit 38mm Narrow-Crown Staples to hold firm across a range of finishing and delicate applications where you want your staples to be less obvious (such as fixing mesh and wire to timber, or installing trim, lattice, upholstery and moulding).

Ideal for finishing applications such as fixing wire and mesh to timber. PowerFit 6000 Narrow Crown Staples have an “Electro-Galvanised” finish, which provide enhanced corrosion resistance and increased durability.

Get your big cleaning jobs done quicker with the PowerFit high-performance turbo floor brush (35mm).

Put the high performance PowerFit mini turbo head (35mm) to the test with your everyday cleaning.

Start cleaning those impossible places with the PowerFit flexible crevice tool (35mm).

The Air Hose is braided for flexibility and durability. It’s resistant to kinking, abrasion, grease and oil. The Air Hose is also rated for a maximum 300psi of pressure and suitable for a variety of industrial and commercial applications.

Cut right to the very edge with the PowerFit 10TPI flush cut jigsaw blade. With 10 teeth for every inch of blade, you’ll be able to balance speed and precision as you cut. And with the longer flush cut design, you’ll be able to cut materials right up to the edge of the jigsaw’s shoe. This is ideal if you’re working in a tight space, where the jigsaw’s shoe would prevent you from completing the cut.

Cut curves into timber with both precision and tidiness thanks to the PowerFit 14TPI scroll jigsaw blades. With 14 teeth for every inch of blade, you’ll be able to keep the material clean and smooth as you cut. And the narrower construction of the scroll blade helps it tackle curves and bends in the product.

Get through the toughest cutting in the blink of an eye with the PowerFit 10TPI jigsaw blades. With 10 teeth for every inch of blade, you’ll be able to balance speed for precision as you cut. These blades are best for straight cuts through material, particularly if you need the job done both quickly and smoothly.

Connect your pneumatic tools and equipment to an air compressor with the Nitto 10m Recoil Air Hose with Nitto Fittings. The Hose’s Nitto fittings (¼” BSP male plug and coupler) are compatible with most compressors, pneumatic tools and equipment. These Nitto Fittings are chrome plated for corrosion protection, ensuring long life.