Search results for: 'spiderman 2 frame generation ghosting'

PowerFit 23Ga 25mm Electro-Galvanized Steel Pin Nails are ideal for fastening small or intricate wood pieces such as timber mouldings, wall and furniture trims, picture frames and upholstering. With a headless pin, these nails are barely visible after they’re fired in. This enables you to achieve a smooth finish on wooden surfaces for sanding, staining and painting.

The PowerFit Replacement Air Filter allows 26cc petrol tools to perform at their full potential. It fits several RYOBI and Homelite 26cc tools including brushcutters, line trimmers, and hedge trimmers.

When you need to get your 2-stroke power tools up and running, fill them up using PowerFit 200ml 2-stroke oil.

Powerfit 25mm C1 Series Electro-Galvanised Brad Nails are suitable for installing trim, casing, panelling, moulding and other non-structural pieces. Read more.

PowerFit 24TPI Fine-Cut All-Purpose Jigsaw Blades equip your jigsaw to make fine, straight cuts in metal materials, plastic, plasterboard, Perspex sheets, and wood (including nail-embedded wood). These fine-cut jigsaw blades feature vented technology to reduce heat build-up, efficiently remove debris, and reduce contact with the material being cut. This allows you to make faster cuts while preserving the life of the blade.

Get any jigsawing job done smoothly with PowerFit 24TPI all-purpose blades. These blades offer a perfect finish to any cut through timber, plastics, metal, copper, plasterboard, Perspex sheeting, and more. This is ideal if the cut you’re working on needs to fit smoothly into place, or will be seen on your finished project.

Deliver the most delicate cuts – straight or curved – with PowerFit 20TPI laminate jigsaw blades. With 20 teeth for every inch of blade, this product will cut as smoothly as possible into any material. This makes it perfect for cutting laminate, or any other material that might crack or break under greater load.

Restore the cutting performance of your Brushcutter with the PowerFit 26cm Tri-Star Brushcutter Blade. This sharp, hardened steel Tri-Blade features three teeth and provides a 26cm cutting path. It’s suitable for slashing thick grass and tall weeds and is a robust alternative to traditional nylon line cutting heads.

Use Powerfit 25mm C Series Electro-Galvanised Brad Nails to secure large trim and mouldings. They’re easy to conceal for staining and painting timber.

Powerfit 28mm 6000 Series Electro-Galvanised Narrow Crown Staples provide optimum holding strength for installing trim, moulding, flooring underlay and more.

Powerfit 20mm C1 Series Electro-Galvanised Brad Nails are suitable for installing trim, casing, panelling, moulding and other non-structural pieces. Read more.

Powerfit 22mm 6000 Series Electro-Galvanised Narrow Crown Staples provide optimum holding strength for installing trim, moulding, flooring underlay and more.

The Air Hose is braided for flexibility and durability. It’s resistant to kinking, abrasion, grease and oil. The Air Hose is also rated for a maximum 300psi of pressure and suitable for a variety of industrial and commercial applications.

You can rely on these PowerFit 38mm Narrow-Crown Staples to hold firm across a range of finishing and delicate applications where you want your staples to be less obvious (such as fixing mesh and wire to timber, or installing trim, lattice, upholstery and moulding).

Ideal for finishing applications such as fixing wire and mesh to timber. PowerFit 6000 Narrow Crown Staples have an “Electro-Galvanised” finish, which provide enhanced corrosion resistance and increased durability.

Finish your DIY woodworking projects with durable yet unobtrusive PowerFit C1 Series Brad Nails. Our brad nails are great for use with thin, soft timber (such as floor skirting and architraves, light trimming, installing panels, and woodwork crafts).