Search results for: 'La colline a des yeux 1977'

Help your RYOBI chainsaw cut faster for longer with the PowerFit 20” Chainsaw Chain. This chainsaw chain replacement fits the RYOBI 50cc Petrol Chainsaw (RCS5050).

Can be used on air fittings, air tools and compressors

Get extra reach and cover more ground when cleaning with your Vacuum using the Powerfit Workshop Vacuum 3.5m Stretch Hose.

Use the Powerfit Workshop Vacuum 35mm Brush 2-Piece Set to clean delicate and hard-to-reach surfaces with your Workshop Vacuum.

PowerFit 23Ga 25mm Electro-Galvanized Steel Pin Nails are ideal for fastening small or intricate wood pieces such as timber mouldings, wall and furniture trims, picture frames and upholstering. With a headless pin, these nails are barely visible after they’re fired in. This enables you to achieve a smooth finish on wooden surfaces for sanding, staining and painting.

PowerFit 23Ga 18mm Electro-Galvanized Steel Pin Nails are ideal for fastening small or intricate wood pieces such as timber mouldings, wall and furniture trims, picture frames and upholstering. With a headless pin, these nails are barely visible after they’re fired in. This enables you to achieve a smooth finish on wooden surfaces for sanding, staining and painting.

PowerFit 23Ga 12mm Electro-Galvanized Steel Pin Nails are ideal for fastening small or intricate wood pieces such as timber mouldings, wall and furniture trims, picture frames and upholstering. With a headless pin, these nails are barely visible after they’re fired in. This enables you to achieve a smooth finish on wooden surfaces for sanding, staining and painting.

These 2-packs of replacement Fuel Primer Bulbs suit Homelite and Ryobi petrol units.

Tackle the toughest cutting applications with the PowerFit diamond masonry jigsaw blade. Each blade is coated in 46 grit diamond-bonded carbide – for the ultimate cut through tough materials. Once fitted, you’ll be ready to cut straight, semi-fine cuts through hard tiles, granite, slate, limestone, porcelain, and other masonry products.

Leave the top of your surface in the best possible condition with PowerFit 14TPI reverse jigsaw blades. With 14 teeth for every inch of blade, you’ll be able to keep the material clean and smooth as you cut. And the inverted blade teeth keep splinters and debris off the top of the surface – making it perfect for any benchtops or surfaces that can’t be inverted.

Cut curves into timber with both precision and tidiness thanks to the PowerFit 14TPI scroll jigsaw blades. With 14 teeth for every inch of blade, you’ll be able to keep the material clean and smooth as you cut. And the narrower construction of the scroll blade helps it tackle curves and bends in the product.

Get through the toughest cutting in the blink of an eye with the PowerFit 10TPI jigsaw blades. With 10 teeth for every inch of blade, you’ll be able to balance speed for precision as you cut. These blades are best for straight cuts through material, particularly if you need the job done both quickly and smoothly.

When you need to get your 2-stroke power tools up and running, fill them up using PowerFit 200ml 2-stroke oil.

Cut right to the very edge with the PowerFit 10TPI flush cut jigsaw blade. With 10 teeth for every inch of blade, you’ll be able to balance speed and precision as you cut. And with the longer flush cut design, you’ll be able to cut materials right up to the edge of the jigsaw’s shoe. This is ideal if you’re working in a tight space, where the jigsaw’s shoe would prevent you from completing the cut.

Disposable dust bag