Search results for: 'cyberpunk 2077 technical ability build'

The PowerFit 10pc HCS Wood Jigsaw Blade Set equips your jigsaw to cut wood, plastic, plasterboard, Perspex sheets, and laminate.

The PowerFit 10pc All-Purpose Jigsaw Blade Set equips your jigsaw to cut metal materials, plastic, plasterboard, Perspex sheets, and wood (including nail-embedded wood). The set comes with various blade types ranging from 5TPI to 24TPI, so you can make fine, semi-fine and rough cuts as required.

PowerFit 24TPI Fine-Cut All-Purpose Jigsaw Blades equip your jigsaw to make fine, straight cuts in metal materials, plastic, plasterboard, Perspex sheets, and wood (including nail-embedded wood). These fine-cut jigsaw blades feature vented technology to reduce heat build-up, efficiently remove debris, and reduce contact with the material being cut. This allows you to make faster cuts while preserving the life of the blade.

You can rely on these PowerFit 38mm Narrow-Crown Staples to hold firm across a range of finishing and delicate applications where you want your staples to be less obvious (such as fixing mesh and wire to timber, or installing trim, lattice, upholstery and moulding).

Ideal for finishing applications such as fixing wire and mesh to timber. PowerFit 6000 Narrow Crown Staples have an “Electro-Galvanised” finish, which provide enhanced corrosion resistance and increased durability.

Finish your DIY woodworking projects with durable yet unobtrusive PowerFit C1 Series Brad Nails. Our brad nails are great for use with thin, soft timber (such as floor skirting and architraves, light trimming, installing panels, and woodwork crafts).

Tackle the toughest cutting applications with the PowerFit diamond masonry jigsaw blade. Each blade is coated in 46 grit diamond-bonded carbide – for the ultimate cut through tough materials. Once fitted, you’ll be ready to cut straight, semi-fine cuts through hard tiles, granite, slate, limestone, porcelain, and other masonry products.

Cut through some of the most difficult surfaces with the PowerFit carbide ceramics jigsaw blade. The blade is coated in 30 grit carbide – for maximum performance and blade longevity. And once fitted, you’ll be ready to cut straight, semi-fine cuts through ceramic wall tiles, fibreglass, cast iron, and other ceramic materials.

Get any jigsawing job done smoothly with PowerFit 24TPI all-purpose blades. These blades offer a perfect finish to any cut through timber, plastics, metal, copper, plasterboard, Perspex sheeting, and more. This is ideal if the cut you’re working on needs to fit smoothly into place, or will be seen on your finished project.

Get any jigsawing job done fast with PowerFit 10-14 TPI all-purpose blades. These blades offer a fast, rough cut through timber, plastics, metal, copper, plasterboard, Perspex sheeting, and more. This is ideal if you’ve got a variety of cutting jobs to do, and if you need them done quickly.

Deliver the most delicate cuts – straight or curved – with PowerFit 20TPI laminate jigsaw blades. With 20 teeth for every inch of blade, this product will cut as smoothly as possible into any material. This makes it perfect for cutting laminate, or any other material that might crack or break under greater load.

Cut right to the very edge with the PowerFit 10TPI flush cut jigsaw blade. With 10 teeth for every inch of blade, you’ll be able to balance speed and precision as you cut. And with the longer flush cut design, you’ll be able to cut materials right up to the edge of the jigsaw’s shoe. This is ideal if you’re working in a tight space, where the jigsaw’s shoe would prevent you from completing the cut.

Leave the top of your surface in the best possible condition with PowerFit 14TPI reverse jigsaw blades. With 14 teeth for every inch of blade, you’ll be able to keep the material clean and smooth as you cut. And the inverted blade teeth keep splinters and debris off the top of the surface – making it perfect for any benchtops or surfaces that can’t be inverted.

Cut curves into timber with both precision and tidiness thanks to the PowerFit 14TPI scroll jigsaw blades. With 14 teeth for every inch of blade, you’ll be able to keep the material clean and smooth as you cut. And the narrower construction of the scroll blade helps it tackle curves and bends in the product.

Get through the toughest cutting in the blink of an eye with PowerFit 6TPI jigsaw blades. With just 6 teeth for every inch of blade, you’ll have the rugged strength you need to cut through something quickly. These blades are best for straight cuts through material, particularly if you need the job done fast.

Get through the toughest cutting in the blink of an eye with the PowerFit 10TPI jigsaw blades. With 10 teeth for every inch of blade, you’ll be able to balance speed for precision as you cut. These blades are best for straight cuts through material, particularly if you need the job done both quickly and smoothly.