Search results for: 'Set de puntas philips Ph2 largas de 15 cm'

The Ryco style ¼" Female Plug is suitable for fitment directly into your air hoses, compressors and air tools and connects with any Ryco style male fittings. This fitting will perform under the pressure of most standard compressors and air tools with a maximum pressure of 150PSI.

The Powerfit Ryco style ¼” Male Plug will connect to any Ryco Style ¼” BSP Female couplers used on compressors, air hoses and air tools that use Ryco style fittings. Made from durable steel that ensures a longer lasting air fitting, while the red-coloured band easily identifies it as a Ryco style fitting.

The Powerfit Nitto style 3/8” Male Swivel Coupler is suitable for use with other Nitto style air tool fittings to connect air tools/accessories that require some flexibility, like an air hose.

The Powerfit Nitto style 1/4" Male Swivel Coupler is suitable for use with other Nitto style air tool fittings to connect air tools or accessories that require some flexibility, like an air hose.

The Nitto style ¼” Female 2-Way Splitter Coupler can connect 2x air hoses to an air compressor at the same time. It is also suitable for use with other Nitto style plugs and male adaptors with a ¼” BSP thread.

The Nitto Style ¼" Female Plug is suitable for fitment with any ¼” BSP Fitting including air hoses, compressors and air tools and connects with any Nitto style male fittings.

The Powerfit Nitto Style ¼” Male Plug will connect to any Nitto Style ¼” Female Plugs used on air hoses, compressors and air tools that use Nitto style fittings.

Leave the top of your surface in the best possible condition with PowerFit 14TPI reverse jigsaw blades. With 14 teeth for every inch of blade, you’ll be able to keep the material clean and smooth as you cut. And the inverted blade teeth keep splinters and debris off the top of the surface – making it perfect for any benchtops or surfaces that can’t be inverted.

PowerFit 23Ga 25mm Electro-Galvanized Steel Pin Nails are ideal for fastening small or intricate wood pieces such as timber mouldings, wall and furniture trims, picture frames and upholstering. With a headless pin, these nails are barely visible after they’re fired in. This enables you to achieve a smooth finish on wooden surfaces for sanding, staining and painting.

PowerFit 23Ga 18mm Electro-Galvanized Steel Pin Nails are ideal for fastening small or intricate wood pieces such as timber mouldings, wall and furniture trims, picture frames and upholstering. With a headless pin, these nails are barely visible after they’re fired in. This enables you to achieve a smooth finish on wooden surfaces for sanding, staining and painting.

These 2-packs of replacement Fuel Primer Bulbs suit Homelite and Ryobi petrol units.

PowerFit 24TPI Fine-Cut All-Purpose Jigsaw Blades equip your jigsaw to make fine, straight cuts in metal materials, plastic, plasterboard, Perspex sheets, and wood (including nail-embedded wood). These fine-cut jigsaw blades feature vented technology to reduce heat build-up, efficiently remove debris, and reduce contact with the material being cut. This allows you to make faster cuts while preserving the life of the blade.

You can rely on these PowerFit 38mm Narrow-Crown Staples to hold firm across a range of finishing and delicate applications where you want your staples to be less obvious (such as fixing mesh and wire to timber, or installing trim, lattice, upholstery and moulding).

Ideal for finishing applications such as fixing wire and mesh to timber. PowerFit 6000 Narrow Crown Staples have an “Electro-Galvanised” finish, which provide enhanced corrosion resistance and increased durability.

Cut through some of the most difficult surfaces with the PowerFit carbide ceramics jigsaw blade. The blade is coated in 30 grit carbide – for maximum performance and blade longevity. And once fitted, you’ll be ready to cut straight, semi-fine cuts through ceramic wall tiles, fibreglass, cast iron, and other ceramic materials.

Get any jigsawing job done smoothly with PowerFit 24TPI all-purpose blades. These blades offer a perfect finish to any cut through timber, plastics, metal, copper, plasterboard, Perspex sheeting, and more. This is ideal if the cut you’re working on needs to fit smoothly into place, or will be seen on your finished project.