Search results for: 'comfort and garden 2 gallon watering can'

Can cut soft timber and plasterboard

Can cut soft timber and plasterboard

Can cut timber, plasterboard, plastics and thin metal

Can cut soft timber and plasterboard

Can buff/polish timber, plastics and fibreglass materials

Can buff/polish timber, plastics and fibreglass materials

The Air Hose is braided for flexibility and durability. It’s resistant to kinking, abrasion, grease and oil. The Air Hose is also rated for a maximum 300psi of pressure and suitable for a variety of industrial and commercial applications.

Powerfit 25mm C1 Series Electro-Galvanised Brad Nails are suitable for installing trim, casing, panelling, moulding and other non-structural pieces. Read more.

Use Powerfit 25mm C Series Electro-Galvanised Brad Nails to secure large trim and mouldings. They’re easy to conceal for staining and painting timber.

Leave the top of your surface in the best possible condition with PowerFit 14TPI reverse jigsaw blades. With 14 teeth for every inch of blade, you’ll be able to keep the material clean and smooth as you cut. And the inverted blade teeth keep splinters and debris off the top of the surface – making it perfect for any benchtops or surfaces that can’t be inverted.

PowerFit 23Ga 25mm Electro-Galvanized Steel Pin Nails are ideal for fastening small or intricate wood pieces such as timber mouldings, wall and furniture trims, picture frames and upholstering. With a headless pin, these nails are barely visible after they’re fired in. This enables you to achieve a smooth finish on wooden surfaces for sanding, staining and painting.

Get any jigsawing job done smoothly with PowerFit 24TPI all-purpose blades. These blades offer a perfect finish to any cut through timber, plastics, metal, copper, plasterboard, Perspex sheeting, and more. This is ideal if the cut you’re working on needs to fit smoothly into place, or will be seen on your finished project.

PowerFit 24TPI Fine-Cut All-Purpose Jigsaw Blades equip your jigsaw to make fine, straight cuts in metal materials, plastic, plasterboard, Perspex sheets, and wood (including nail-embedded wood). These fine-cut jigsaw blades feature vented technology to reduce heat build-up, efficiently remove debris, and reduce contact with the material being cut. This allows you to make faster cuts while preserving the life of the blade.

Ideal for fine cut outs & recesses

Powerfit 20mm C1 Series Electro-Galvanised Brad Nails are suitable for installing trim, casing, panelling, moulding and other non-structural pieces. Read more.