Search results for: 'STFCL 12CA – 16 M'

You can rely on these PowerFit 38mm Narrow-Crown Staples to hold firm across a range of finishing and delicate applications where you want your staples to be less obvious (such as fixing mesh and wire to timber, or installing trim, lattice, upholstery and moulding).

Ideal for finishing applications such as fixing wire and mesh to timber. PowerFit 6000 Narrow Crown Staples have an “Electro-Galvanised” finish, which provide enhanced corrosion resistance and increased durability.

Tackle the toughest cutting applications with the PowerFit diamond masonry jigsaw blade. Each blade is coated in 46 grit diamond-bonded carbide – for the ultimate cut through tough materials. Once fitted, you’ll be ready to cut straight, semi-fine cuts through hard tiles, granite, slate, limestone, porcelain, and other masonry products.

Leave the top of your surface in the best possible condition with PowerFit 14TPI reverse jigsaw blades. With 14 teeth for every inch of blade, you’ll be able to keep the material clean and smooth as you cut. And the inverted blade teeth keep splinters and debris off the top of the surface – making it perfect for any benchtops or surfaces that can’t be inverted.

Can buff/polish timber, plastics and fibreglass materials

Can buff/polish timber, plastics and fibreglass materials

The PowerFit 10pc HCS Wood Jigsaw Blade Set equips your jigsaw to cut wood, plastic, plasterboard, Perspex sheets, and laminate.

PowerFit 24TPI Fine-Cut All-Purpose Jigsaw Blades equip your jigsaw to make fine, straight cuts in metal materials, plastic, plasterboard, Perspex sheets, and wood (including nail-embedded wood). These fine-cut jigsaw blades feature vented technology to reduce heat build-up, efficiently remove debris, and reduce contact with the material being cut. This allows you to make faster cuts while preserving the life of the blade.

If you find yourself needing a replacement hose, or just want a spare, the 1.8m PowerFit spare hose is your solution.

Keep your M-Class Workshop Vacuum compliant with the Powerfit M-Class 30–40L Plastic Dust Bag.

Greatly increase the reach of your workshop vac with the Powerfit Workshop Vacuum 5m Extra Long Hose provides.

Get extra reach and cover more ground when cleaning with your Vacuum using the Powerfit Workshop Vacuum 3.5m Stretch Hose.

Upgrade your Workshop Vacuum with the rugged Powerfit Workshop Vacuum Stainless Steel Telescopic Pole.

Use the Powerfit Workshop Vacuum 35mm Brush 2-Piece Set to clean delicate and hard-to-reach surfaces with your Workshop Vacuum.

Use Powerfit 30mm C Series Electro-Galvanised Brad Nails to secure large trim and mouldings. They’re easy to conceal for staining and painting timber.

Use Powerfit 25mm C Series Electro-Galvanised Brad Nails to secure large trim and mouldings. They’re easy to conceal for staining and painting timber.